![]() Drawmer DL251 Spectral Compressor 1.105 € 914 €+VAT Add to cart.A two stage soft/hard limiting approach has been adopted with yellow and red LEDs signifying soft (approaching limit point) and hard limiting (hitting limit point). Output: The output stage includes a limiter with a preset threshold (+16dB) and a variable master fader with output bargraph metering which sets the overall output level from OFF to +15dB.Low settings on all bands enable replication of classic tube mic sounds. Tubesound: Multi band ‘tube saturation’ allows users to create subtle warming, high frequency effects or out-and-out obvious effects via three separate, independently adjustable audio bands.Both the attack and release times are Program AdaptiveTM leaving the user with only ratio, threshold and make-up gain to adjust. Compressor: High quality VCA compressor based on that of the MX30 and DL241.EQ: High and low shelving sections as well as fully parametric mid range EQ with variable frequency, ‘Q’, and ☑8dB cut/boost.Only the sibilant sounds are subjected to gain reduction so that the lisping effect of simpler de-essers is avoided. The MX60 de-esser is almost completely automatic requiring the user only to select a switchable male or female setting and to adjust the amount of de-essing required. De-Esser: Floating threshold de-ess operation where the de-esser automatically and continually readjusts its own threshold level.Controls via a single variable threshold and switchable fast/slow auto release. This enables stable gating and eliminates ‘chatter’ around threshold. Program Adaptive™ Gate: Drawmer’s proprietary Program AdaptiveTM circuitry means that all the time constants are automatically optimised for the material being processed.A high impedance Instrument jack is located on the front panel for use with electric guitars, basses, synths and drum machines. Input Stage: The input stage may be switched to accept mic, line, or instrument level signals – the XLR mic input has switchable 48V phantom power and phase reverse, while the line input is on both a balanced +4dB TRS jack and an unbalanced -10dB jack.The mic pre-amp features the same discrete component design found in the legendary Drawmer 1960, the de-esser is derived from the MX50, the VCA based compressor is similar to the MX30, while the peak limiter and gate can be tracked back to the DL241 compressor/limiter. The Drawmer MX60 Pro draws its technology from the most successful of Drawmer products. The Drawmer MX60 Pro Front End One is a unique mic/line/instrument input channel in a single rack space providing high quality Drawmer processing prior to tape/hard disc recording. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |